Set for vacuum casting chamber 20.0l VC3028AF + pump 170l/min VP160
Description
Vacuum set is used in degassing process of molding products such as silicone, resin (polyurethane, epoxy), gypsum, wax.
The culvert integrated with the vacuum chamber enables to supplying of flooding materials from the external container directly into the interior of the chamber under vacuum. The mechanical flow controller included in the set allows to precise process control.
The chamber’s body is made of aluminum, its capacity is 20.0l and internal dimensions are: diameter 30cm to 28cm in height. Lid is made of thick polycarbonate. The chamber is provided with a silicone seal. The applied seal is reliable and has a low susceptibility to mechanical deformation. Excellent transparency of the lid allows you to observe degassing process. Two ball valves allow you to freely control the course of the degassing process and mounted glycerin vacuum gauge indicates current vacuum in the chamber. The chamber is equipped with a intake air filter, which effectively makes it impossible to get any dirt to degassed material. The chamber is attached to a pump with a pneumatic fitting, which is fitted in reinforced hose with an internal diameter of 8 mm and a length of 1.5 m. The product is made from materials of the highest quality and branded sealant to the threads.
The vacuum pump VP160 is a single stage, oil pump with free air displacement of 170l/min (6CFM) and ultimate vacuum 5Pa (37microns).
New series of vacuum pumps is characterized by high efficiency, very high vacuum value and quiet working. RS vacuum pumps represent high quality for a reasonable price and are covered by a one year warranty.
All RS series pumps are equipped with oil mist filter and a one-way mechanical valve. This valve prevents the backflow of oil from pump into the chamber.
All of our vacuum systems, are 100% checked and verified before shipping to the customer.
Warning. Chambers with polycarbonate lid are not designed for wood stabilization or to work with alcohol, ethanol, acetone, monomers or polymers based on acrylic, styrene-born resins. For these purposes, we recommend using chambers with tempered glass lid, which we also have in our offer.
Kit Contents:
- vacuum pump VP160
- oil needed for the first start
- vacuum chamber VC3028AF
- reinforced pneumatic hose with a fitting enabling connection to a vacuum pump
- instruction manual
Technical data
Chamber model | VC3028AF |
Tank capacity | 20.0l |
Tank dimensions | 300mm(Dia)x280mm(H) |
Body material | aluminum |
Lid material | polycarbonate |
Chamber weight | 5.7kg |
Pump model | VP160 |
Pump power supply | 220-240VAC / 50Hz |
Pump ultimate vacuum | 5Pa |
Pump efficiency | 170l/min (6.0CFM) |
Pump power | 1/2HP |
Pump inlet connection | 1/4" SAE Flare |
Pump oil capacity | 450 ml |
Pump dimensions | 340x130x250mm |
Pump weight | 9.2kg |